New Automotive Workshop in Coventry

Project Type:
Industrial

Installation Type:
Epoxy Coatings

Finish Type:
FeRFA Type 3

ACC Flooring was asked by a new client to install a high build epoxy coating to their new automotive workshop in Coventry. The 1,215m² floor area was shotblast & diamond edge ground to remove any laitance from the concrete substrate.

The expansion joints were all diamond saw cut & the failed compound raked out prior to the installation of ACC Maintain, a low odour polyurethane concrete which provides excellent durability & impact resistance. Small substrate repairs were also carried out & again ACC Maintain was used to facilitate these repairs.

2 coats ACC HB SF high build epoxy coating in Light Grey was installed to the main floor area. 2 coats of ACC HB SF was applied to the designated bays & once cured demarcation using Altro Resin’s Altro Line high visibility, high gloss, high build epoxy line marking system in RAL 2003 Orange was installed to mark out each bay.

2 coats of Altro Line in RAL 2003 Orange were applied to the EV Bay with ACC HB SF in Dark Grey used to create the demarcation lines around the bay.

ACC HB SF is ideal for workshop, warehouse, storage & general industry locations & with the correct maintenance programme will have a life expectancy of a minimum 7 years.

Altro Line is the perfect solution for identifying isolated areas & spaces & defining pedestrian walkways & zebra crossings.

The project was completed on time despite a tight working window to the delight of the client.

Credits