The FeRFA Guide to Preparing Surfaces for Application of Resin Systems

Introduction

This guide is based on the extensive knowledge and experience of FeRFA manufacturers and specialist Surface Preparation Contractors.

It is recommended that you seek advice from FeRFA manufacturers, specialists Surface Preparation Contractors and the manufacturer of the resin system selected. Selecting the correct method(s) of Surface Preparation for the background surface/substrate is essential for the adhesion of the resin system selected to realise the life expectancy of your finished aesthetic finish.
Todays Surface Preparation equipment and tools are designed to be used with dust extraction for clean, safe operation.

Description

Surface Preparation is the term used to clean and profile new surfaces, (concrete, asphalt, steel and stone) and also the removal of old surface finishes or to clean and profile existing resin finishes to apply the specified resin system.

NOTE: Whatever method of Surface Preparation is selected, it is recommended that no traffic passes over the area preparation and that the surface is thoroughly vacuumed before applying the selected resin system.

The size of equipment selected, the condition of the background surface, the type and thickness of material to be removed or clean have an effect on the production rates achievable from the selected process. It is recommended that operatives of large and 3 phase equipment are trained to NVQ level 2 as a minimum requirement and hold a CSCS skilled worker card for construction sites. For small areas or where access is restricted tools are used.

RAMS (Risk and Method Statements), COSHH and equipment specifications should always be provided by the specialist contractor prior to starting work together with Training competency.